Sunday, August 3, 2014

Al-Hoty Co.,Ltd Job Openings for Saudi Aramco

Al-Hoty Co. , Ltd Job Openings for Saudi Aramco
Attractive Offers on the Spot. Interview on September 2014 in Mumbai and Makati, Send CV to ahcjobs@al-hoty.com (Male Applicants Only)

Draftsman II & III
Drafts Engineering Drawings from detailed sketches and notes, working on CADD workstation (Microstation). 5 Years experience.

Maintenance Panner I
13 Year varued craft experience (exp in more than one major craft is desirable), acquired with maintenance work of a division. Possess a good working knowledge of Critical Patch Scheduling.

Engineer I
BS Engg (Chemical, Mechanical, Electrical) -9 Years experience pref. in the oil industry or similar process industry.

Maintenance (Projects) Planner I
2 Year Diploma in Mechanical Engineering plus 12-15 years field planning experience with minimum of five (5) years of experience in Refinery Maintenance Projects Planning.

BS Mechanical of Plant Mechanical Engineering
Practical experience in project planning, execution, commissioning, (Mechanical, Electrical / Instrumntation/ Digital) 10 Years experience in plants mechanical engineering in Oil/Gas (Minimum of 5 Years in refining).

Heavy Equipment Technician
BS Mechanical Engineer or Equivalent diploma, min 6 Years Experience in maintenance and repair of equipment, engines, generators in shop and field.

Survey Party Chief
BS Civil or Geodetic or Surveying, 4 years experience in earth work or road construction. Familiar with soil compaction stabilization techniques and modern test methods are a requirement for Well sites location preparation; knowledge in Autocad and Microstation PC operation, computation of field survey data, including geometric and volumetric calculations, using programmable calculator and PC. General survey computations including geometric, traverse and level circuit adjustment and grid projection coordinate calculations, computer assisted map production system, proficient in all phases of digital map production, navigation system, symbols and abbreviations; navigational light characteristics, geographic information systems (GIS) and topologic structuring of datasets for GIS migration.

Civil Engineers 2
BS Civil or Geodetic, 4 years experience in earth work, road construction

Welding Engineer
10 Year Welding Engineer with related welding experience, including metallurgical engineering, in a construction, fabrication, or repair facility with BSC in Materials/mettalurgical engineering or similary technology diploma with more experience.

Sr. Inspector - Electrical
BS Electrical, 10 Years either electrical, instrumentation or telecommunication in construction/petrochemical industry, OR, 2 years industrial/technical College Diploma +15 Years experience, knowledge of quality systems standards and methods (ISO 9001). Quality Management work experience in construction of either industrial electrical power distribution and control systems, or industrial OSP/ISP telecommunication systems (petrochemical or hydrocarbon experience is preferred). Working knowledge of applicable industry standards for either electrical power and control system (i.e, NFPA 70 NEC, ANSI/EEE C2 NESC, NEMA, UL, NACE, API and PIP/CII) or telcommunication system (i.e. GTE, BICSI TDMM, NFPA 70 NEC, EIA/TIA, IEC, UL and ANSI/IEEE C2 NESC).

Quality Systems Specialist
10 Years Experience.

Project Engineer
10 Year experience as Project Engineer - Civil

Process Engineer I - TST
15 Years of Experience as Project Engineer with Process background including 5 years in Refining/Petrochemical.

Process Engineer I
10 Years Experience in Process Engineering: P&IDs, PFDs, ESDs, UFD, MHB.

Process Engineer (NAPHTA)
BS Chemical Engineering, 10 years experience Oil/Gas plants Design and Engineering, knows HYSIS, PIPESIM and PIPEPHASE software.

Process Engineer (AROMATICS)
10 year Experience Oil/Gas, BS Chemical Engineering, knows HYSIS, PIPESIM and PIPEPhas softwares

Scheduling Engineer
10 Years Experience, BS Engineering. Preferably with petro-chem/oil/gas experience.

Instrument Engineer
10 Years experience in BS Engineering. Preferably with petro-chem/oil/gas/experience.

PCS Engineer
10 Years Experience, BS Engineering. Preferably with petro-chem/oil/gas/experience.

Mechanical Engineer - Static Eqpt
10 Years Experience, BS Mech Engineer. Preferably with petro-chem/oil/gas/experience.

Mechanical Engineer - Rotating
10 Years Experience

Mechanical Engineer - Piping
10 Years Experience

Logistic Services Support
7 Years Experience with BS Degree

Interface Coordinator
10 Years experience - preferrably with BS degree

HSE Engineer 
10 Years Experience, BS Degree, preferably with Oil/Gas Industry Experience.

Field Service Support Coordinator
8 Years experiences, Coordinates, monitors and improves fields service activities; provides supports and guidance to service personnel, familiar with standard concepts, pratices and procedures.

Engineering Assistant
6 Years Engineering Background required.

Cost Engineer
7 Years Experience.

Construction Engineers
10 Year Civil Engineering, (BS/MS/BE) 10 Years Experience on Engineering and Structural Design in Oil and Gas industries, EPC Projects

Civil Engineer / Construction Engineer
10 Year Experience Construction Engineer, practical construction experience and/or a degree in engineering with good field/design experience.

Mechanical/Rigger Trainer
Certified Rigger such as CITB / OSHA or its equivalent (approvership), prepare lift plans for critical and specialized lifts; knowledge of calculating hitch capacity, sling selection and hand signals; previous training experience would be an advantage.

HVAC Trainer
BSME + 5 Years experience in HVAC servicing and maintenance in the Oil and Gas Petrochemical Plants. Preferred a master degree holder with specialization in Heating, Ventilating and air-conditioning systems (HVAC Direct digital controls (DDC) and building management system (BMS), hydraulic balancing, carrier, trane and york HVAC instructional experience in technical colleges.

Driving Improvement Program Trainer
BS or Associate Degree in Industrial/Vocational Education +3 years experience; Instructs trainees on Driving Behaviors and techniques; prepare required lesson plans; capable of using classroom instruction and visual aids; administers, proctors and grades written and performance tests; observes, counsels and evaluates trainees.
Prepares trainees records, such as attendance, grade and progress sheets.

Truck Trainer
BS Degree plus 6 years industrial experience, or as trainer in industrial, technical or vocational skills.

Heavy Equipment Trainer
BS Degree plus 6 years industrial experience, or as trainer in industrial, technical or vocational skills.

Surveyor Trainer
BS degree in (Vocational Education or Engineering/Science) plus 8 years ind experience or as trainer in industrial or vocational skills including a min 5 year as trainer. OR Formal vocational training and 14year hands-on experience Surveying. Experience in Land Surveying and Survey instrument minor repair and PM.

Welding Trainer
10 years experiences as welder working in oil and gas/petrochemical industry, 3 years apprenticeship or approved CITB training, hands on experience of SMAW method, welding of structural steelwork and pipe welding of carbon steel, using both E-6010 and E-7018 electrodes for open root, fill, and cap, plate sizes up to 2/4 inch thickness and pipe sizes from 1 inch up to 8 inch schedule 40 - schedule 140 pipe or BS with minimum 6 years experience, GTAW of Stainless steel, carbon steel and low alloy pipe welding of small bore pipe 1 inch to 2 1/2 inch diameter, certified with any: AWS, ASME/ANSI, API, BS, ASTM Codes and Standards for welding certification.

Pipefitter / Fabricator Trainer
11 Years experience as mechanical engineer or 11 years as mechanical maintenance tech in Oil and Gas / Petrochemical industry, power plants industry and Desalination plants, read fabrication drawings isometic and orthographic projections, able to develop material lists and fabrication templates for the projects or BSc with minimum 6 years experience.

Mechanical Trainer
4 Years experience as mechanical engineer or 11 years as a mechanical maintenance tech in Oil and Gas / Petrochemical industry, Power plants industry and desalination plants, disassembly, inspection  disassembly, inspection and repair of valves, pumps, gearboxes, and compressors, operating lathe machine is preferred, know mechanical subjects; bearing and lubrication, Laser alignment, vibration analysis, motor operated valve actuators, mechanical seals, and turbines.

Instrument Technician Trainer (PCST)
11 Years experience in Pneumatic, Electronic and Digital instrumentation in oil and gas / petrochemical industry, power plants industry and desalination plants or BSc with minimum 4 years experience include PM or Field Devices (DVCs, Smart Transmitters, conventional Transmitters, Valves, controllers and FF devices). Knowledge and exp on DCS (Yokogawa Centum, HoneywellTDC300, DeltaV) and PLC (Tricon, Siemens, AB) is an advantage.

Operator Trainer
11 Years experience as supervising or Control board operator for Oil & Gas/Petrochemical industry, Power Plants industry and Desalination plants or BSc with minimum 4 years experience). Expd in one or more of the following processes, Distillation/fractionation, reactor/catalyct, cryogenic, hydro treating, GOSP, WIP utililities or tank farm operations. DCS experience preferred.

Electrical Trainer
4 yearse experience as maintenance engineer or 11 years as technician in Oil and Gas/ Petrochecmical industry and desalination plants. ably to troubleshoot and repair AC machines, able to maintain HV transformers HV/LV switchgear, UPS (interruptible power supply) systems and motor operated valves, using electrical / electronic, test equipment, schematics and one line diagrams.